Witam. Właśnie dzisiaj dostałem kabelek i na gorąco przeskanowałem samochód. Prosiłbym o radę czy mam mam się czym martwić na początek
Oto mój pierwszy log ze skanowania błędów:
Kod:
VAG-COM Version: Release  311.2-N


Chassis Type: 8L - Audi A3/S3
Scan: 01,02,03,08,15,17,22,35,37,45,54,55,56
 
Address 01     -------------------------------------------------------
   Controller: 06A 906 018 AR 
   Component: 1.8L R4/5VT MOTR HS D05
   Coding: 04000
   Shop #: WSC 06435
1 Fault Found:
00282 - Throttle Position Actuator (V60)
            27-10 - Implausible Signal - Intermittent
Readiness: N/A

Address 03     -------------------------------------------------------
   Controller: 1J0 907 379  E 
   Component: ABS/EDS 20 IE CAN  0001
   Coding: 13504
   Shop #: WSC 06435
1 Fault Found:
01312 - Powertrain Data Bus
            37-10 - Faulty - Intermittent

Address 08     -------------------------------------------------------
   Controller: 8L0 8 ö8 L08
   Component: 8L0820043D  
   Note: Excessive Comm Errors

Skipping Address 15-Airbags

Address 17     -------------------------------------------------------
   Controller: 8L0 919 880 E  
   Component: AB-KOMBIINSTR. VDO D03 
   Coding: 04042
   Shop #: WSC 19411
   IMMO-IDENTNR: 
1 Fault Found:
01039 - Coolant Temperature Sensor (G2)
            30-10 - Open or Short to B+ - Intermittent

Address 35     -------------------------------------------------------
   Controller: 8L0 862 257 G  
   Component: ZV-Pumpe, DWA, Funk D05
   Coding: 13130
   Shop #: WSC 06435
3 Faults Found:
01371 - Alarm triggered by Door Contact Switch: Driver's Side
            35-00 - -
01370 - Alarm triggered by Interior Monitoring
            35-00 - -
00956 - Key 2
            09-00 - Adaptation Limit Surpassed

Address 45     -------------------------------------------------------
   Controller: 8L0 951 173    
   Component: Innenraumueberw.    D04
   Coding: 00001
   Shop #: WSC 06435
1 Fault Found:
01382 - Alarm triggered by Anti-Theft Sensor: Front Left
            35-00 - -

Address 56     -------------------------------------------------------
   Controller: 4B0 035 186    
   Component:  Radio              D01
   Coding: 00000
   Shop #: WSC 00000
No fault code found.

End   -------------------------------------------------------
Najbardziej martwi mnie błąd 1312 nie wiem co oznacza. Kolejny to błąd nr 282 Serwomotor pozycji przepustnicy – V60. Czy to coś poważnego ?
Wiem też, że czujnik G2 chyba zepsuty lub ma zwarcie ?